Heath-consultants Remote Methane Leak Detector Intrinsically Safe (R Manual de usuario descargar pdf (Pagina 14)

Battery Charger

The RMLD-IS is provided with a universal AC battery charger. The plug of the charger

can be changed to fit the type of receptacle used in your location.

Charging Procedure

**Warning**

To reduce the risk of ignition of a flammable or explosive atmosphere, the battery must

be recharged only in a location known to be non-hazardous.

To recharge the internal battery, perform the following procedure:

1. Turn the instrument off.

2. Plug the AC plug into a surge-protected and conditioned outlet.

3. Plug the charger plug into the RMLD-IS charger port.

4. On the front of the control box, a blinking red light indicates that the charger is

charging.

5. Allow the unit to charge until the green indicator is solid or has faded out.

6. Unplug the charger.

Fig. 2-2

**Warning**

Only use the HEATH supplied RMLD-IS battery charger to recharge the unit. Use

of any other charger may cause severe damage to the battery or electrical circuits.

101296-0 RMLD IS MANUAL REV J Page 14 of 40

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Sin comentarios

Heath-consultants Remote Methane Leak Detector Intrinsically Safe (R Manual de usuario Pagina 14