Heath-consultants Detecto-Pak 4 (DP) Manual de usuario descargar pdf (Pagina 15)

FUEL CYLINDERS

100786-0 Rev. D 05/09

**NOTE**

When ordering, it is extremely important to specify CERTIFIED. This

helps ensure quality gas. Not ordering CERTIFIED gas increases the risk

of not securing a 40% H

(hydrogen)/60% N

(nitrogen) mix of less than

(0.5) ppm hydrocarbon background. See Chapter Eight, Section VIII, - A,

Item 2b for example of negative effect.

level (determined by fuel mother tank internal pressure). DO NOT

EXCEED 1750 psig pressure in the fuel cylinder.

8. Open bleed off valve on transfiller to eliminate pressure in

transller.

9. Loosen knurled nut with nger pressure and remove fuel cylinder.

10. Remove transller from fuel mother tank, replace safety cap or caps,

and safely store fuel mother tank. For storing and transporting of

these fuel mother tanks/fuel cylinders, see Paragraphs D. and E. of

this Section.

C. ORDERING FUEL MOTHER TANKS

When ordering a mother tank of fuel, it is recommended that a certied

mix of 40% hydrogen/60% nitrogen +/- 2% with less than .5 ppm of

hydrocarbon be requested.

The following companies can supply the proper fuel mixtures in fuel

mother tanks. This list is not intended as an endorsement, and other

suppliers may be available. If you are unable to locate a fuel source, please

contact your nearest Heath representative.

SUPPLIERS OF FUEL GAS MIXTURES:

AIRCO SCIENTIFIC GAS PRODUCTS

LINDE MATHESON GAS PRODUCTS

ALPHAGAZ SCOTT SPECIALTY GASES

LIQUID CARBONIC AIR PRODUCTS

MG INDUSTRIES

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 48 49

Sin comentarios

Heath-consultants Detecto-Pak 4 (DP) Manual de usuario Pagina 15