Heath-consultants Hi Flow Sampler Manual de usuario descargar pdf (Pagina 14)

Operation Hi Flow



Sampler

14 Instruction 0055-9017

After the banner screen is displayed, the sensors are automatically zeroed to ambient

conditions. Zeroing time is dependent on the temperature of the sensors, and whether

there is residual gas present inside the sensor chambers. If a sensor fails to zero, a

message appears at the bottom of the LCD describing the cause of the failure. Refer to

Section 6 Troubleshooting for possible causes and remedies for this failure.

After the sensors are zeroed, either the instrument’s Basic or Expanded Main Screen

appears (refer to Section 2.8). The example below shows the Basic Main Screen.

The arrow symbols on the left indicate that

there are more items to view above and/or

below the current display.

Press the ∧ and ∨

keys to view additional

items.

2.7 Turning OFF the Hi Flow



Sampler

Turn OFF the unit by flipping the ON/OFF switch to its OFF position.

2.8 Selecting the Basic or Expanded Menu Mode

Select the Basic or Expanded Menu Mode as follows:

1. From either the Basic or Expanded Main Screen, select Menu > Menu Mode.

2. Highlight the desired menu mode, and then press the I/O ↵ key to select that

mode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 61 62

Sin comentarios

Heath-consultants Hi Flow Sampler Manual de usuario Pagina 14