Heath-consultants Hi Flow Sampler Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 62
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
Operation Hi Flow
Sampler
20 Instruction 0055-9017
2.14.1 Automatic 2-Stage Measurement Mode
In the Automatic 2-Stage Mode the unit performs a leak rate measurement at first a
high flow rate for 1 minute, and then automatically shifts to a lower flow rate and
performs another measurement for another minute. The final measured and calculated
values are automatically saved in memory. This mode is used to measure leaks that are
easily identifiable and captured.
Select the automatic measurement mode as follows:
1. From the Expanded Main Screen, select Menu > Operating Mode.
2. Highlight Automatic 2-Stage, and then press the I/O key.
3. Press ESC to return to the Main Screen. Observe that (A) should appear at the
bottom of the screen.
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 61 62

Comentarios a estos manuales

Sin comentarios